Caterpillar 250 Skid Steer Loader Specs & Buying Research

At a glance

Key specifications

Rated Operating Capacity2,689 lb1,220 kgCaterpillar 250 — Operating Specifications. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verified

Operating Weight7,829 lb3,551 kgCaterpillar 250 — Weights. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verified

Bucket Pin Height - Maximum Lift10 ft 4 in3,150 mmCaterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verified

Net Power - ISO 924973 hp55 kWCaterpillar 250 — Engine. Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.Manufacturer verified

Overall dimensions

Length - With Bucket on Ground11 ft 3 in3,430 mmManufacturer verified

Vehicle Width over Tires5 ft 6 in1,677 mmManufacturer verified

Height - Top of Cab6 ft 9.9 in2,080 mmManufacturer verified

Measurement basis: Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Precision visual reference

Dimensions and working range

Published measurements for the stated configuration. Illustration not to scale.

Reviewed visual

Caterpillar 250 Skid Steer Loader, illustrative side and front reference views; not a scale drawing. — Machine reference views

Overall Size

ALength - With Bucket on Ground11 ft 3 in3,430 mmManufacturer verified

BVehicle Width over Tires5 ft 6 in1,677 mmManufacturer verified

CHeight - Top of Cab6 ft 9.9 in2,080 mmManufacturer verified

Working Range

Bucket Pin Height - Maximum Lift10 ft 4 in3,150 mmManufacturer verified

Reach - Maximum Lift/Dump1 ft 5.6 in448 mmManufacturer verified

Clearance at Maximum Lift and Dump8 ft 0.2 in2,443 mmManufacturer verified

Ground Clearance7.7 in195 mmManufacturer verified

Reference details

Overall measurement views reviewed 2026-09-06. Illustrative artwork, not a scale drawing.

Documented model generation; confirm serial/PIN and installed configuration · United States / North American reference

Canonical reference: heavyeq.ca/specs/skid-steers/caterpillar/250/ · Printed from HeavyEQ.ca. Confirm the actual machine and current manufacturer documentation before transport or operation.

Year, generation & configuration

Model generation and configuration

Generation / series: Current 250 manufacturer record
Applicable region: United States / North American reference
Year handling: Confirm the serial/PIN and production year when matching an individual machine to this reference.

Model identity

Model family, generation & status

Model family: Caterpillar 250
Generation / record: Current 250 manufacturer record
Product status: Current manufacturer model — status checked September 2026
Regional scope: United States / North American reference

No verified lineage relationship published. HeavyEQ reviewed first-party sources and did not force a predecessor or successor from model numbering.

United States / North American reference

Verified specifications

Values retain their cited source, verification status and original publication basis. Imperial is presented first while manufacturer-published dual units and configuration context remain attached to every value.

Qualified specifications with value-level verification status
Specification	Imperial	Metric	Standard / configuration	Source
Net Power - ISO 9249	73 hp	55 kW	Caterpillar 250 — Engine. Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.Manufacturer verified	Caterpillar
Gross Power - SAE J1995:2014	74 hp	55 kW	Caterpillar 250 — Engine. Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.Manufacturer verified	Caterpillar
Operating Weight	7,829 lb	3,551 kg	Caterpillar 250 — Weights. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Length - With Bucket on Ground	11 ft 3 in	3,430 mm	Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Vehicle Width over Tires	5 ft 6 in	1,677 mm	Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Height - Top of Cab	6 ft 9.9 in	2,080 mm	Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Ground Clearance	7.7 in	195 mm	Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Bucket Pin Height - Maximum Lift	10 ft 4 in	3,150 mm	Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verified	Caterpillar
Clearance at Maximum Lift and Dump	8 ft 0.2 in	2,443 mm	Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Reach - Maximum Lift/Dump	1 ft 5.6 in	448 mm	Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Wheel Base	3 ft 7.1 in	1,094 mm	Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verified	Caterpillar
Rated Operating Capacity	2,689 lb	1,220 kg	Caterpillar 250 — Operating Specifications. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar

What the specifications mean

The published 250 values remain attached to their stated configuration and rating basis.

Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

An individual machine must be verified by serial/PIN, installed equipment and actual measurements.

Configuration intelligence

Configurations & specification differences

These observations are scoped to the cited generation and region. They are not a list of valid option combinations.

Material configurations in this research record
Record	Verified observation	Scope
Lift path & counterweights	Caterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).	Current 250 manufacturer recordUnited States / North American reference

A brochure configuration is not an individual marketplace machine. Serial/PIN and build information are required for exact verification.

Used 250 inspection priorities

Inspect chaincase, axles, wheel bearings, tires and drive response under load.
Check lift-arm pivots, quick-attach locks, cylinders and structural repairs.
Test standard- or high-flow hydraulics with the intended powered attachment.
Match the 250 model plate, fitted attachment and undercarriage to the cited reference configuration.

Configuration-aware inspection: these checks are triggered by machine category, installed configuration and technology package. Brochure-listed technology must be physically present, active, licensed and calibrated on the used machine.

Hours, condition and ownership cost

Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.

Cost drivers to model

Tires, drive components and loader linkage are material wear costs.
High-flow attachment duty changes fuel, cooling and maintenance demand.
Cab, controls, coupler and counterweight options affect value and fit.

Compatibility graph

Attachment considerations

Relationships below identify relevant classes only unless a stronger evidence state is shown. They never assert exact used-attachment fitment.

relevant attachment class

Skid-steer buckets and forks

Verify mounting interface, attachment weight, load centre.

Open attachment research

relevant attachment class

Powered compact-loader attachments

Verify flow, pressure, case drain, electrical controls.

Open attachment research

Before confirming fitment

generation and machine configuration
mounting interface, coupler or pin geometry
hydraulic flow, pressure, return and case drain
attachment weight and machine capacity limits
electrical controls or required machine options

Model-reference transport profile

Transport reference

Reference measurements retain their configuration and verification status. Confirm the actual transport setup before booking.

Manufacturer verifiedOperating Weight7,829 lb3,551 kgCaterpillar 250 — Weights. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Manufacturer verifiedLength - With Bucket on Ground11 ft 3 in3,430 mmCaterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Manufacturer verifiedVehicle Width over Tires5 ft 6 in1,677 mmCaterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Manufacturer verifiedHeight - Top of Cab6 ft 9.9 in2,080 mmCaterpillar 250 — Dimensions. Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Reference specifications can differ from the actual configured machine. Confirm dimensions and weight before booking transportation.

Confirm or replace before a transport request

actual weight
actual travel length, width and height
attachments and removable work tools
bucket, blade, carriage or boom position
loading condition

Source provenance

First-party sources and verification notes

Only manufacturer-authored records are linked publicly. Provisional measurements remain marked until a matching first-party record is confirmed.

Caterpillar

250 Skid Steer Loader | Cat | Caterpillar

United States / North American reference · exact model technical page · accessed September 6, 2026 · status: Manufacturer verified

Open source