HeavyEQ parts intelligence
Research first. Identify the installed component. Confirm the application.
Model discovery • Exact part fitment requires machine identification
MC110i EVO2 US spec o251322v101 · North American manufacturer reference. Production-year bounds have not been established in this parts catalogue.
View the accepted equipment specifications →Crushers: Tracked, wheeled or fixed; Power source; Integrated screen; Feed arrangement. Use the configuration and measurement boundary stated beside each value.
Identify the installed crusher, screenbox or material-handling unit independently of the plant. These methods establish no part application to this model.
Equipment-class discovery • Systems vary with configuration
Start with the crushing mechanism and chamber identity. Jaw dies, cone liners and impact blow bars represent different wear systems.
Record chamber revision, wear profile, material/application and fastening or retention documentation. Keep feeder, screen and conveyor equipment separate from the crusher’s service identity.
A crushing plant’s carrier or engine identity is not enough to choose chamber wear parts. No setting or clearance is supplied here.
Start with the manufacturer, model suffix and installed equipment. The following specialist subjects help describe a sourcing request; they do not identify a specific orderable part.
Record the installed assembly identification, its position and configuration. Ask the supplier which documentation connects the proposed replacement to that assembly.
Record the installed assembly identification, its position and configuration. Ask the supplier which documentation connects the proposed replacement to that assembly.
Record the installed assembly identification, its position and configuration. Ask the supplier which documentation connects the proposed replacement to that assembly.
Record the installed assembly identification, its position and configuration. Ask the supplier which documentation connects the proposed replacement to that assembly.
Record the installed assembly identification, its position and configuration. Ask the supplier which documentation connects the proposed replacement to that assembly.
Record the installed assembly identification, its position and configuration. Ask the supplier which documentation connects the proposed replacement to that assembly.
For a used or rebuilt component, ask for its donor-unit provenance, inspection record, repair scope and any remaining identification marks. A donor model is context, not proof of fitment to another machine.
These are equipment-class discovery subjects. Confirm whether each is installed on the actual unit.
Engine family · build code · emissions generation
Engine/ECU calibration · pressure · connector · emissions
Engine emissions tier · aftertreatment arrangement · region
Engine option · physical envelope · fittings · fan drive
Circuit flow/pressure · mounting · serial range · porting
Drive architecture · gear ratio · installed assembly code
Track frame · pitch · links · shoe width · serial · variant
ECU software · harness revision · voltage · protocol · calibration
Cab generation · certifications · option packages
Dimensional fit · pin/bore · load · reinforcement revisions
Chamber/revision · media size · equipment configuration
Belt width · pitch · tension · pulley · drive · splice type
Research Kleemann source access, component identity and regional limitations →
The MC110i EVO2 is a mobile jaw-crusher configuration with a coordinated feeder and crushing process. Preserve EVO2 and the regional i designation when comparing wear or control components.
Wear-component selection also requires jaw profile, material/application details and the installed assembly. The model name does not establish an interchangeable jaw, cheek plate or belt.
Do not infer model years, serial breaks, machine compatibility or interchange from a family designation.
Kleemann MC110i EVO2 introduction for USA and Canada ↗ · USA and Canada publication
Equipment specifications and generation evidence stay on the accepted model page. They are not proof that a specific replacement part fits.
Parts & maintenance
Use the accepted model identity to explore component families. Confirm the installed assembly, configuration and serial/PIN with the manufacturer before ordering.
Technical research & specification evidence
These pilots enrich the existing MC 110i EVO2 page. Its accepted US technical sheet identifies the mobile plant and the installed crusher model separately. Keep that separation through jaw-plate, toggle, bearing and conveyor research; the plant name is useful context, but it is not an individual wear-part identifier.
The US sheet identifies the single-toggle crusher as STR110–070, with a 44-by-28-inch inlet. It describes a direct crusher drive and electrical main auxiliary drives. Its standard-equipment list identifies manganese-steel crusher jaws. These statements document the reference architecture, without identifying a jaw casting, toggle assembly, bearing designation or conveyor-belt part number.
The manufacturer's brochure discusses different jaw tooth profiles with application-specific purposes. That makes the actual plate profile and position important evidence to collect. Retain the casting mark, fixed/moving location, chamber identification and any previous replacement paperwork. Keep alloy or profile descriptions attributed to their issuer. Do not use the inlet size as a plate dimension, or treat two catalogue descriptions as an OEM replacement chain. The research question is which documented plate belongs to the actual chamber configuration.
Separate the request for a toggle-related component from one for a bearing or larger crusher assembly. Photograph accessible markings and retain the assembly revision or approved parts-diagram reference. A bearing cannot be selected from the machine's crushing capacity, and the words single-toggle do not supply toggle dimensions or an overload component's part identity. Where a tag or source is missing, identify the missing evidence explicitly. Keep descriptions of operating symptoms separate from a verified component identification or an assumed failure diagnosis.
Specify whether the conveyor inquiry concerns the side-discharge conveyor, main crusher-discharge conveyor, belt, drum or drive components. The sheet lists these as different plant sections and distinguishes configuration options. Retain the conveyor's actual identifier and belt marking rather than copying a nominal plant dimension into a replacement-belt order. Different brochure revisions already contain differing machine measurements, so record document code and configuration with every value. This guide adds identification structure without replacing accepted equipment dimensions, reproducing OEM tables or asserting a serial-specific bill of materials.
Published values retain their exact reference scope. Empty fields mean the value has not been established; they never mean zero. General model associations do not establish installed or serial-specific fitment.
| Property | Value / status | Scope and interpretation |
|---|---|---|
| Reference crusher assembly model | STR110–070 | Reference: US MC 110i EVO2 reference; exact installed chamber revision unverified Manufacturer published reference; not a HeavyEQ machine measurement MOBICAT MC 110i EVO2 US Technical Data — o251322v101 / NA-2949219 EN-US-02/23 V1 ↗ · o251322v101, PDF p.2, Crusher — Single-toggle jaw crusher model Actual installed component and serial-specific applicability unverified |
| Reference crusher inlet width | 44 in | Reference: US reference inlet geometry; not jaw plate width Manufacturer published reference; not a HeavyEQ machine measurement MOBICAT MC 110i EVO2 US Technical Data — o251322v101 / NA-2949219 EN-US-02/23 V1 ↗ · o251322v101, PDF p.2, Crusher inlet width × depth Actual installed component and serial-specific applicability unverified |
| Reference crusher inlet depth | 28 in | Reference: US reference inlet geometry; not toggle or jaw plate fitment Manufacturer published reference; not a HeavyEQ machine measurement MOBICAT MC 110i EVO2 US Technical Data — o251322v101 / NA-2949219 EN-US-02/23 V1 ↗ · o251322v101, PDF p.2, Crusher inlet width × depth Actual installed component and serial-specific applicability unverified |
PDF pp.2–3, Crusher, conveyor sections, drive footnote and configuration list
PUBLIC_REFERENCE_ONLY_NO_MEDIA_OR_TABLE_REPRODUCTION
Customer Support, tooth-shape discussion; printed pp.42–43 technical section
PUBLIC_REFERENCE_ONLY_NO_MEDIA_OR_TABLE_REPRODUCTION
Original HeavyEQ analysis and selected source facts. No catalogue reproduction licence, manufacturer endorsement or machine-specific compatibility is implied.