HeavyEQ parts intelligence
Kleemann Parts & Model Identification
Research first. Identify the installed component. Confirm the application.
Manufacturer source guide · Original identification research
Use the correct parts source
The official jaw-tool guide distinguishes tooth profiles and material applications, rather than treating every jaw plate as equivalent.
Tool selection considers feed material, fines handling and chamber geometry. Public application guidance does not replace a serial-specific order check.
Source geography: US parts guide; confirm Canadian supply. Confirm the documentation and supplying channel for the actual machine’s market.
Prepare the identification record
- Identify jaw, impact or cone crusher type and complete plant designation.
- Record plant serial and the installed crushing chamber or jaw configuration.
- Provide feed material and the existing wear-part reference for a dealer-confirmed selection.
Keep full serial/PIN and contact information out of public descriptions and photographs. Use the manufacturer’s appropriate channel for private serial-specific checks. A successful search does not replace inspection of the currently installed assembly.
Kleemann Crushing Tools for Jaw Crushers | Parts Guide ↗ · independently reviewed 2026-10-15. Public reference for original commentary; manufacturer diagrams, catalogue tables and stock are not copied here.
Processing-system identification research
Identify the installed crusher, screenbox or material-handling unit independently of the plant. These methods establish no part application to this model.
- Jaw crusher wear: distinguish position, profile, material and retention
- Cone liners: identify the mantle, concave and installed chamber together
- Impactor wear research: identify the rotor before comparing blow bars
- Legacy crusher research: historical names do not identify every chamber
- Prepare a chamber-aware crusher, screen or wear-parts request
- Hammer mills: identify the rotor assembly and each wear component
- Plant, chamber, issuer and supplier-reference evidence
Existing HeavyEQ equipment context
5 accepted equipment identities connect this manufacturer with 3 equipment categories. Generation and regional context remain on their existing specification pages. These links establish discovery coverage, not verified parts applications.
Kleemann MC 110i EVO2 Crusher
Crushers · MC110i EVO2 US spec o251322v101
North American manufacturer referenceKleemann MSS 802i EVO Screener
Screeners · MSS802i EVO US technical sheet o215140v101
North American manufacturer referenceKleemann MBT 24i Mobile Stacker
Conveyors, Feeders and Stackers · MOBIBELT MBT24i US sheet o247919v101
North American manufacturer referenceKleemann MCO 90i EVO2 Crusher
Crusher · MCO 90i EVO2 US specification, current technical data with post-screen options
Manufacturer North American referenceKleemann MR 110i EVO2 Crusher
Crusher · MR 110i EVO2 US technical data, Scania Tier 4f / Stage IV
Manufacturer North American referenceComponent and sourcing context
- Crushers: component systems and identification questions
- Screeners: component systems and identification questions
- Conveyors, Feeders and Stackers: component systems and identification questions
Identify the engine, pump, axle, transmission or other tagged assembly independently of the carrier. An aftermarket issuer’s number and a seller stock code remain separate from the machine OEM’s identity. Ask a supplier to identify the documentation behind any cross-reference and the conditions attached to a proposed replacement.
Historical and generation research
These 2 source-supported designations come from the legacy research queue. Some still have current regional product pages. Only records explicitly presented as past or non-current by the cited OEM carry that context; the queue alone does not prove discontinuation.
Kleemann MC 110 R EVO
OEM-supported designation · Historical/discontinued status not established
OEM matrix explicitly names MC110 R EVO separately from MC110 Ri EVO and EVO2. Identity evidence only; no engine-part fitment imported.
- Evidence region / context
- Wirtgen Group global technical matrix
- Production period
- Not established for the complete designation
Do not infer model years, serial breaks, machine compatibility or interchange from a family designation.
Use this section to retain the exact designation and its source context. A parts request still needs identification of the currently installed assembly.
Wirtgen Group official HVO-ready model matrix ↗ · reviewed 2026-10-15. Identity evidence does not import a part application, even where the source is an item’s model list.
Kleemann MC 110i EVO2
OEM-supported designation · Historical/discontinued status not established
OEM Canadian publication confirms exact MC110i EVO2 identity; do not label this as discontinued merely because it entered the historical queue.
The MC110i EVO2 is a mobile jaw-crusher configuration with a coordinated feeder and crushing process. Preserve EVO2 and the regional i designation when comparing wear or control components.
Wear-component selection also requires jaw profile, material/application details and the installed assembly. The model name does not establish an interchangeable jaw, cheek plate or belt.
- Evidence region / context
- USA and Canada publication
- Production period
- Not established for the complete designation
Do not infer model years, serial breaks, machine compatibility or interchange from a family designation.
Continue with the existing Kleemann MC 110i EVO2 Crusher model identity →
Kleemann MC110i EVO2 introduction for USA and Canada ↗ · reviewed 2026-10-15. Identity evidence does not import a part application, even where the source is an item’s model list.
Request or offer an actual item
Keep a catalogue identity separate from available stock. For a used or rebuilt assembly, describe its donor and inspection evidence, installed position, item condition and what the quote includes. A supplier’s statement remains attributable to the supplier until independently verified.