Sell Equipment

Attachment research

Augers

Choose the drive, bit and carrier as one system. Soil, hole diameter and depth determine the task; the mount alone does not establish compatibility.

Heavy-equipment attachments arranged for compatibility inspection

Define the hole before choosing the drive

Record the required diameter and depth, soil and rock conditions, and the space available to keep the auger aligned. Select bits and teeth intended for that material. Treat extensions as part of the complete assembly: they change handling and extraction space, so a deeper advertised capability does not guarantee access on a particular site.

Confirm the hydraulic and mechanical combination

Compare the auger drive’s permitted flow and pressure with the installed carrier circuit. Identify the drive shaft, bit connection and mounting arrangement rather than assuming similarly sized components interchange. Confirm control direction and hose routing through the expected movement using the manufacturer’s instructions.

Inspect the expensive wear points

Inspect teeth, pilot, flights, shaft connection, mounting pins and hose condition. Check gearbox leakage and ask for service history. Arrange a suitable demonstration with the correct bit and carrier so vibration, alignment and operation can be evaluated together. Price replacement teeth and worn connections separately from the drive.

Build the attachment purchase brief
DecisionEvidence to obtainHow to use it
Drive and bitDrive model, bit connection and soil conditionsSpecify the complete drilling assembly
Hole geometryDiameter, depth and extension requirementsCheck handling and access as well as reach
Wear reserveTeeth, pilot and flight conditionPrice consumables separately from the drive

Compatibility factors to verify

Information required

  • Hole diameter, depth and ground conditions
  • Drive flow and pressure limits
  • Bit connection, mount and retention hardware
  • Extension handling and overhead space
  • Gearbox, flights and tooth replacement estimate

Fitment and operating checks

  • Carrier machine class and serial-specific configuration
  • Attachment weight, centre of gravity and machine stability
  • Pin geometry, ear width or exact coupler interface
  • Hydraulic flow, pressure, return line and case drain where applicable
  • Auxiliary electrical controls and manufacturer restrictions

Manufacturer guidance

Reviewed 2026-09-08

Screening is not confirmation

Final fitment, stability, hydraulic performance and safe operating limits must be confirmed through applicable manufacturer guidance, a dealer or a qualified attachment supplier.

Related verified model research

A short class-level research path—not an exact-fitment list.

Caterpillar 320 Excavator

Current North American 320 product page · exact attachment fitment still requires machine and attachment verification.

Explore

Caterpillar 336 Excavator

Current North American 336 product page · exact attachment fitment still requires machine and attachment verification.

Explore

John Deere 210 P-Tier Excavator

Current P-Tier · exact attachment fitment still requires machine and attachment verification.

Explore

Komatsu PC210LC-11 Excavator

Dash-11 · exact attachment fitment still requires machine and attachment verification.

Explore

Compatibility screening worksheet

Narrow the requirements—never guess exact fitment

Select a researched model and attachment class to expose what is known and what still needs verification.

No selection in this checker is an attachment approval. Unknown fitment remains unknown.