At a glance
Key specifications
Measurement basis: PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length.
Overall dimensions
Precision visual reference
Dimensions and working range
Published measurements for the stated configuration. Illustration not to scale.
Overall Size
Working Range
Measurement basis: PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length.
Reference details
Visual visual:model-family:atlas-copco:pas-100-hf:depth · revision 1 · generated 2026-09-08
Documented model generation; decorative reference illustration · Manufacturer North American reference
Canonical reference: heavyeq.ca/specs/site-support-equipment/atlas-copco/pas-100-hf/ · Printed from HeavyEQ.ca. Confirm the actual machine and current manufacturer documentation before transport or operation.
Dimension verification
First-party confirmation exception list
Overall trailer length
The published 114.34-inch chain excludes a rear projection; no unambiguous end-to-end length assigned.
PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length. · checked 2026-09-08Maximum suction lift
Use the exact operating conditions and manufacturer curve; no generic suction-lift assumption introduced.
PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length. · checked 2026-09-08Overall height
The 65.56-inch dimension terminates at lifting-eye centre, below its upper edge. Exact overall height remains unconfirmed.
PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length. · checked 2026-09-08Year, generation & configuration
Model generation and configuration
- Generation / series
- PAS 100 HF T4F YD US product reference sheet
- Applicable region
- Manufacturer North American reference
- Year handling
- Confirm the serial/PIN and production year when matching an individual machine to this reference.
Model identity
Model family, generation & status
- Model family
- Atlas Copco PAS 100 HF T4F YD
- Generation / record
- PAS 100 HF T4F YD US product reference sheet
- Product status
- Production status not confirmed — status checked September 2026
- Regional scope
- Manufacturer North American reference
No verified lineage relationship published. HeavyEQ reviewed first-party sources and did not force a predecessor or successor from model numbering.
Manufacturer North American reference
Verified specifications
Values retain their cited source, verification status and original publication basis. Imperial is presented first while manufacturer-published dual units and configuration context remain attached to every value.| Specification | Imperial | Metric | Standard / configuration | Source |
|---|---|---|---|---|
| Width — trailer outside tires | 5 ft 5.1 in | 1,654.0 mm | PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Atlas Copco |
| Height to lifting-eye centre | 5 ft 5.6 in | 1,665.2 mm | PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Atlas Copco |
| Suction connection — ANSI 150 | 4 in | 101.6 mm | PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Atlas Copco |
| Discharge connection — ANSI 150 | 4 in | 101.6 mm | PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Atlas Copco |
| Maximum solids size | 1.8 in | 45.72 mm | PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Atlas Copco |
| Maximum head | 110 ft | 33.528 m | PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Atlas Copco |
What the specifications mean
Maximum flow and maximum head are separate endpoints of the pump curve. Choose the duty point using the actual suction, discharge, elevation and pipe losses.
The drawing’s 114.34-inch length starts at an equipment datum and does not cover every rear projection. It is deliberately not used as overall trailer length.
Configuration intelligence
Configurations & specification differences
These observations are scoped to the cited generation and region. They are not a list of valid option combinations.
| Record | Verified observation | Scope |
|---|---|---|
| Reference configuration | PAS 100 HF T4F YD with Yanmar 3TNV88 engine, open frame and trailer. Drawing dimensions retained by their stated datums; partial length chains are not overall length. | PAS 100 HF T4F YD US product reference sheetManufacturer North American reference |
A brochure configuration is not an individual marketplace machine. Serial/PIN and build information are required for exact verification.
Used PAS 100 HF T4F YD inspection priorities
- Inspect impeller, casing, seals and priming system for the intended fluid and solids; follow the manufacturer isolation and inspection procedure.
- Check suction/discharge connections, engine maintenance and trailer running gear. Obtain the matching pump curve and setup instructions.
Configuration-aware inspection: these checks are triggered by machine category, installed configuration and technology package. Brochure-listed technology must be physically present, active, licensed and calibrated on the used machine.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Estimate pumping duty, hose or pipework, setup time and standby requirements together. A maximum-flow headline does not predict the actual job duration.
- Include abrasion-related wear and supplier service support without assuming a service-life or fuel-use figure.
Configuration
Equipment and configuration
Match the installed equipment to the serial-specific build record and the measurement basis shown above.
Configuration details to confirm
- Trailer, skid or portable
- Energy source
- Enclosure
- Integrated auxiliaries
A model specification does not establish compatibility with a particular attachment or option.
Model-reference transport profile
Transport reference
Reference measurements retain their configuration and verification status. Confirm the actual transport setup before booking.
Reference specifications can differ from the actual configured machine. Confirm dimensions and weight before booking transportation.
Confirm or replace before a transport request
- actual weight
- actual travel length, width and height
- attachments and removable work tools
- bucket, blade, carriage or boom position
- loading condition
Source provenance
First-party sources and verification notes
Only manufacturer-authored records are linked publicly. Provisional measurements remain marked until a matching first-party record is confirmed.PAS 100 HF T4F YD US product reference sheet
Manufacturer North American reference · official technical document · accessed September 8, 2026 · status: Manufacturer verified