At a glance
Key specifications
Overall dimensions
Measurement basis: D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated.
Precision visual reference
Dimensions and working range
Published measurements for the stated configuration. Illustration not to scale.
Overall Size
Measurement basis: D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated.
Working Range
Reference details
Overall measurement views reviewed 2026-09-06. Illustrative artwork, not a scale drawing.
Documented model generation; confirm serial/PIN and installed configuration · United States / North American reference
Canonical reference: heavyeq.ca/specs/dozers/caterpillar/d6-xe/ · Printed from HeavyEQ.ca. Confirm the actual machine and current manufacturer documentation before transport or operation.
Year, generation & configuration
Model generation and configuration
- Generation / series
- Current D6 XE manufacturer record
- Applicable region
- United States / North American reference
- Year handling
- Confirm the serial/PIN and production year when matching an individual machine to this reference.
Model identity
Model family, generation & status
- Model family
- Caterpillar D6 XE
- Generation / record
- Current D6 XE manufacturer record
- Product status
- Current manufacturer model — status checked September 2026
- Regional scope
- United States / North American reference
No verified lineage relationship published. HeavyEQ reviewed first-party sources and did not force a predecessor or successor from model numbering.
United States / North American reference
Verified specifications
Values retain their cited source, verification status and original publication basis. Imperial is presented first while manufacturer-published dual units and configuration context remain attached to every value.| Specification | Imperial | Metric | Standard / configuration | Source |
|---|---|---|---|---|
| Net Power - Rated - ISO 9249/SAE J1349 | 215 hp | 161 kW | Caterpillar D6 XE — Engine. Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the time of manufacture. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. ** Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. Machine Build Number 20B Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified | Caterpillar |
| Operating Weight | 51,333 lb | 23,285 kg | Caterpillar D6 XE — Weights. Published reference configuration; fitted options can vary. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Width of Standard Shoe | 2 ft | 610 mm | Caterpillar D6 XE — D6 XE Push Arm. Published reference configuration; fitted options can vary. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Length of Machine (Blade Straight) | 17 ft 10 in | 5.436 m | D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Width across End Bits | 10 ft 10.4 in | 3.312 m | D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Machine Height**** | 10 ft 5.5 in | 3.188 m | D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Ground Clearance | 1 ft 2.2 in | 0.361 m | D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Track Gauge | 6 ft 4 in | 1.930 m | D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Width across End Bits | 10 ft 10.4 in | 3.312 m | D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Length of Machine (Blade Straight) | 17 ft 10 in | 5.436 m | D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
What the specifications mean
The dimensional reference uses a straight standard/SU blade and excludes unstated rear implements. Do not inherit an LGP VPAT footprint from the D6 page.
A D6 XE reference for buyers comparing the specific drive and blade package with conventional D6 records.
Alternatives worth comparing
These are research paths, not interchangeable configurations or a ranked winner.Caterpillar D1 Dozer
The ripper is a separate rear projection; the base blade-included length is not the same as a ripper-equipped transport length.
ExploreCaterpillar D2 Dozer
Caterpillar D2 Dozer reference specifications, including overall length - with blade - standard, blade: blade width - standard, dozer height - standard. Use the stated configuration when comparing dimensions and working performance.
ExploreConfiguration intelligence
Configurations & specification differences
These observations are scoped to the cited generation and region. They are not a list of valid option combinations.
| Record | Verified observation | Scope |
|---|---|---|
| Undercarriage & track shoes | D6 XE — Standard undercarriage and first-column standard/SU blade, blade straight; no rear implement unless stated. | Current D6 XE manufacturer recordUnited States / North American reference |
A brochure configuration is not an individual marketplace machine. Serial/PIN and build information are required for exact verification.
Used D6 XE inspection priorities
- Request inspection by personnel familiar with the fitted XE drive system, plus blade, undercarriage and diagnostics documentation.
- Record the exact serial/PIN, installed options and inspection limitations. These are purchase inspection priorities, not claims of a model-specific failure pattern.
Configuration-aware inspection: these checks are triggered by machine category, installed configuration and technology package. Brochure-listed technology must be physically present, active, licensed and calibrated on the used machine.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Build a supplier-supported maintenance and utilization scenario for the actual drive package; do not assign an assumed fuel or repair advantage.
- Use the ownership calculator with quoted repairs, actual scheduled hours, utilization and transport costs; leave unknown assumptions visible.
Compatibility graph
Attachment considerations
Relationships below identify relevant classes only unless a stronger evidence state is shown. They never assert exact used-attachment fitment.
Implements are treated as configurations for this machine class. Blade, ripper, winch and rear-equipment details must be verified on the actual dozer.
Before confirming fitment
- generation and machine configuration
- mounting interface, coupler or pin geometry
- hydraulic flow, pressure, return and case drain
- attachment weight and machine capacity limits
- electrical controls or required machine options
Model-reference transport profile
Transport reference
Reference measurements retain their configuration and verification status. Confirm the actual transport setup before booking.
Reference specifications can differ from the actual configured machine. Confirm dimensions and weight before booking transportation.
Confirm or replace before a transport request
- actual weight
- actual travel length, width and height
- attachments and removable work tools
- bucket, blade, carriage or boom position
- loading condition
Source provenance
First-party sources and verification notes
Only manufacturer-authored records are linked publicly. Provisional measurements remain marked until a matching first-party record is confirmed.D6 XE Dozers | Electric Drive Dozer | Cat | Caterpillar
United States / North American reference · exact model technical page · accessed September 6, 2026 · status: Manufacturer verified
D6 XE — official technical specifications
United States / North American reference · official technical document · accessed September 6, 2026 · status: Manufacturer verified
