Caterpillar D10 Dozer Specs & Buying Research

At a glance

Key specifications

Operating Weight154,888 lb70,256 kgCaterpillar D10 — Weights. D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

10SU ABR - Width (over end bits)16 ft 2.5 in4,940 mmCaterpillar D10 — Blades. Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees *Does not include hydraulic controls but includes blade cylinders, pusharms. **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

Engine Power - Net SAE J1349/ISO 9249** - Forward602 hp449 kWCaterpillar D10 — Engine - U.S. EPA Tier 4 Final/EU Stage V. *Excludes all fan losses. All Engine ratings apply at 1,800 rpm. Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

Engine Power - Gross SAE J1995* - Forward631 hp471 kWCaterpillar D10 — Engine - U.S. EPA Tier 4 Final/EU Stage V. *Excludes all fan losses. All Engine ratings apply at 1,800 rpm. Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

Overall dimensions

Length - With SU-Blade24 ft 4 in7,416 mmCaterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

Height - FOPS Cab*13 ft 6.8 in4,134 mmCaterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

Precision visual reference

Dimensions and working range

Published measurements for the stated configuration. Illustration not to scale.

Reviewed visual

Caterpillar D10 Dozer, illustrative side and front reference views; not a scale drawing. — Machine reference views

Overall Size

ALength - With SU-Blade24 ft 4 in7,416 mmCaterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

B10SU ABR - Width (over end bits)16 ft 2.5 in4,940 mmCaterpillar D10 — Blades. Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees *Does not include hydraulic controls but includes blade cylinders, pusharms. **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

CHeight - FOPS Cab*13 ft 6.8 in4,134 mmCaterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

Working Range

Track Gauge8 ft 4.4 in2,550 mmCaterpillar D10 — Undercarriage. Published reference configuration; fitted options can vary. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

Width - Shoe2 ft610 mmCaterpillar D10 — Undercarriage. Published reference configuration; fitted options can vary. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

Ground Clearance2 ft 4.5 in725 mmCaterpillar D10 — Undercarriage. Published reference configuration; fitted options can vary. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified

Reference details

Overall measurement views reviewed 2026-09-06. Illustrative artwork, not a scale drawing.

Documented model generation; confirm serial/PIN and installed configuration · United States / North American reference

Canonical reference: heavyeq.ca/specs/dozers/caterpillar/d10/ · Printed from HeavyEQ.ca. Confirm the actual machine and current manufacturer documentation before transport or operation.

Year, generation & configuration

Model generation and configuration

Generation / series: Current D10 manufacturer record
Applicable region: United States / North American reference
Year handling: Confirm the serial/PIN and production year when matching an individual machine to this reference.

Model identity

Model family, generation & status

Model family: Caterpillar D10
Generation / record: Current D10 manufacturer record
Product status: Current manufacturer model — status checked September 2026
Regional scope: United States / North American reference

No verified lineage relationship published. HeavyEQ reviewed first-party sources and did not force a predecessor or successor from model numbering.

United States / North American reference

Verified specifications

Values retain their cited source, verification status and original publication basis. Imperial is presented first while manufacturer-published dual units and configuration context remain attached to every value.

Qualified specifications with value-level verification status
Specification	Imperial	Metric	Standard / configuration	Source
Engine Power - Net SAE J1349/ISO 9249** - Forward	602 hp	449 kW	Caterpillar D10 — Engine - U.S. EPA Tier 4 Final/EU Stage V. Excludes all fan losses. All Engine ratings apply at 1,800 rpm. Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). *Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified	Caterpillar
Engine Power - Gross SAE J1995* - Forward	631 hp	471 kW	Caterpillar D10 — Engine - U.S. EPA Tier 4 Final/EU Stage V. Excludes all fan losses. All Engine ratings apply at 1,800 rpm. Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). *Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verified	Caterpillar
Operating Weight	154,888 lb	70,256 kg	Caterpillar D10 — Weights. D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Length - With SU-Blade	24 ft 4 in	7,416 mm	Caterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
10SU ABR - Width (over end bits)	16 ft 2.5 in	4,940 mm	Caterpillar D10 — Blades. Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees Does not include hydraulic controls but includes blade cylinders, pusharms. *D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Height - FOPS Cab*	13 ft 6.8 in	4,134 mm	Caterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Ground Clearance	2 ft 4.5 in	725 mm	Caterpillar D10 — Undercarriage. Published reference configuration; fitted options can vary. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
10SU ABR - Width (over end bits)	16 ft 2.5 in	4,940 mm	Caterpillar D10 — Blades. Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees Does not include hydraulic controls but includes blade cylinders, pusharms. *D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Length - With SU-Blade	24 ft 4 in	7,416 mm	Caterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Track Gauge	8 ft 4.4 in	2,550 mm	Caterpillar D10 — Undercarriage. Published reference configuration; fitted options can vary. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Width - Shoe	2 ft	610 mm	Caterpillar D10 — Undercarriage. Published reference configuration; fitted options can vary. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar

What the specifications mean

The published D10 values remain attached to their stated configuration and rating basis.

Caterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.

An individual machine must be verified by serial/PIN, installed equipment and actual measurements.

Configuration intelligence

Configurations & specification differences

These observations are scoped to the cited generation and region. They are not a list of valid option combinations.

Material configurations in this research record
Record	Verified observation	Scope
Undercarriage & track shoes	Caterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.	Current D10 manufacturer recordUnited States / North American reference
Blade & rear equipment	Caterpillar D10 — Blades. Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees Does not include hydraulic controls but includes blade cylinders, pusharms. *D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.	Current D10 manufacturer recordUnited States / North American reference

A brochure configuration is not an individual marketplace machine. Serial/PIN and build information are required for exact verification.

Used D10 inspection priorities

Obtain measured undercarriage percentages and matched-component history.
Inspect blade linkage, push arms or C-frame, equalizer bar and pivot points.
Test steering, transmission and installed grade-control hardware under load.
Match the D10 model plate, fitted attachment and undercarriage to the cited reference configuration.

Configuration-aware inspection: these checks are triggered by machine category, installed configuration and technology package. Brochure-listed technology must be physically present, active, licensed and calibrated on the used machine.

Hours, condition and ownership cost

Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.

Cost drivers to model

Undercarriage life depends on material, slope, travel and turning practices.
Blade edges, rear equipment, final drives and cooling need separate reserves.
Technology value depends on installed, licensed and calibrated hardware.

Compatibility graph

Attachment considerations

Relationships below identify relevant classes only unless a stronger evidence state is shown. They never assert exact used-attachment fitment.

Implements are treated as configurations for this machine class. Blade, ripper, winch and rear-equipment details must be verified on the actual dozer.

Before confirming fitment

generation and machine configuration
mounting interface, coupler or pin geometry
hydraulic flow, pressure, return and case drain
attachment weight and machine capacity limits
electrical controls or required machine options

Model-reference transport profile

Transport reference

Reference measurements retain their configuration and verification status. Confirm the actual transport setup before booking.

Manufacturer verifiedOperating Weight154,888 lb70,256 kgCaterpillar D10 — Weights. D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.

Manufacturer verifiedLength - With SU-Blade24 ft 4 in7,416 mmCaterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.

Manufacturer verified10SU ABR - Width (over end bits)16 ft 2.5 in4,940 mmCaterpillar D10 — Blades. Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees *Does not include hydraulic controls but includes blade cylinders, pusharms. **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.

Manufacturer verifiedHeight - FOPS Cab*13 ft 6.8 in4,134 mmCaterpillar D10 — Dimensions (Approximate). *Includes grouser height for total dimensions on hard surfaces. Standard undercarriage/SU or standard blade where specified; LGP and Carrydozer variants excluded.

Reference specifications can differ from the actual configured machine. Confirm dimensions and weight before booking transportation.

Confirm or replace before a transport request

actual weight
actual travel length, width and height
attachments and removable work tools
bucket, blade, carriage or boom position
loading condition

Source provenance

First-party sources and verification notes

Only manufacturer-authored records are linked publicly. Provisional measurements remain marked until a matching first-party record is confirmed.

Caterpillar

D10 Dozer | Bulldozer | Cat | Caterpillar

United States / North American reference · exact model technical page · accessed September 6, 2026 · status: Manufacturer verified

Open source