At a glance
Key specifications
Overall dimensions
Measurement basis: W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.
Precision visual reference
Dimensions and working range
Published measurements for the stated configuration. Illustration not to scale.
Overall Size
Measurement basis: W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.
Working Range
Reference details
Visual visual:model-family:wirtgen:w-50-ri:depth · revision 1 · generated 2026-09-08
Documented model generation; decorative reference illustration · Manufacturer North American reference
Canonical reference: heavyeq.ca/specs/cold-planers/wirtgen/w-50-ri/ · Printed from HeavyEQ.ca. Confirm the actual machine and current manufacturer documentation before transport or operation.
Dimension verification
First-party confirmation exception list
Ground clearance
A matching ground-clearance figure was not identified in the current US dimensional table.
W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri. · checked 2026-09-08Year, generation & configuration
Model generation and configuration
- Generation / series
- W 50 Ri US EPA Tier 4f, current US brochure and dimensional drawing
- Applicable region
- Manufacturer North American reference
- Year handling
- Confirm the serial/PIN and production year when matching an individual machine to this reference.
Model identity
Model family, generation & status
- Model family
- Wirtgen W 50 Ri
- Generation / record
- W 50 Ri US EPA Tier 4f, current US brochure and dimensional drawing
- Product status
- Production status not confirmed — status checked September 2026
- Regional scope
- Manufacturer North American reference
No verified lineage relationship published. HeavyEQ reviewed first-party sources and did not force a predecessor or successor from model numbering.
Manufacturer North American reference
Verified specifications
Values retain their cited source, verification status and original publication basis. Imperial is presented first while manufacturer-published dual units and configuration context remain attached to every value.| Specification | Imperial | Metric | Standard / configuration | Source |
|---|---|---|---|---|
| Transport length — folded conveyor | 24 ft 11 in | 7,600 mm | W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Width A — W 50 Ri | 5 ft 5 in | 1,640 mm | W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Height — folded canopy | 8 ft 8 in | 2,650 mm | W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Length without conveyor | 12 ft 10 in | 3,900 mm | Conveyor removed; base-machine dimension.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Length with conveyor raised | 28 ft 4 in | 8,650 mm | Conveyor raised as shown in the operating dimensional drawing.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Conveyor height — raised drawing | 12 ft 7 in | 3,840 mm | Raised conveyor position in the manufacturer drawing; not a transport height.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Height — canopy upright | 11 ft 8 in | 3,550 mm | Canopy upright; separate from conveyor discharge height.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Milling width | 1 ft 8 in | 500 mm | W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Milling depth — maximum | 8 in | 210 mm | W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Conveyor belt width | 1 ft 2 in | 350 mm | W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Conveyor length | 18 ft 4 in | 5,600 mm | W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Wheelbase | 7 ft 5 in | 2,250 mm | W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.Manufacturer verified | Wirtgen |
What the specifications mean
A rear conveyor adds truck-loading reach and transport length. Compare the folded 7,600 mm envelope with the 3,900 mm base machine only after deciding whether the conveyor stays installed.
The 500 mm milling width and 210 mm maximum depth describe cutting capability, not production rate. Pavement, tooling, pass depth and truck exchange determine the working cycle.
Configuration intelligence
Configurations & specification differences
These observations are scoped to the cited generation and region. They are not a list of valid option combinations.
| Record | Verified observation | Scope |
|---|---|---|
| Reference configuration | W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri. | W 50 Ri US EPA Tier 4f, current US brochure and dimensional drawingManufacturer North American reference |
A brochure configuration is not an individual marketplace machine. Serial/PIN and build information are required for exact verification.
Used W 50 Ri inspection priorities
- Inspect drum tooling, holder wear, conveyor belt and folding joints; demonstrate water spray and depth control under the machine’s approved operating procedure.
- Check the model and emissions plate and count the fitted wheels. Optional wheel arrangements and canopy equipment should be documented before transport planning.
Configuration-aware inspection: these checks are triggered by machine category, installed configuration and technology package. Brochure-listed technology must be physically present, active, licensed and calibrated on the used machine.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Include picks, holders, conveyor components and water-system service in the operating budget; small-machine access benefits do not remove those wear costs.
- Review loading logistics behind the machine. A site with insufficient truck clearance may favor a conveyor-free setup or another work sequence.
Configuration
Equipment and configuration
Match the installed equipment to the serial-specific build record and the measurement basis shown above.
Configuration details to confirm
- Drum package
- Propulsion
- Conveyor folding
- Grade control
A model specification does not establish compatibility with a particular attachment or option.
Model-reference transport profile
Transport reference
Reference measurements retain their configuration and verification status. Confirm the actual transport setup before booking.
Measurement basis: W 50 Ri with 500 mm drum, long rear conveyor folded for transport and canopy folded; US EPA Tier 4f Deutz TCD 4.1 L4. Dimensions follow the W 50 Ri column, not W 60 Ri.
Reference specifications can differ from the actual configured machine. Confirm dimensions and weight before booking transportation.
Confirm or replace before a transport request
- actual weight
- actual travel length, width and height
- attachments and removable work tools
- bucket, blade, carriage or boom position
- loading condition
Source provenance
First-party sources and verification notes
Only manufacturer-authored records are linked publicly. Provisional measurements remain marked until a matching first-party record is confirmed.W 50 Ri US EPA Tier 4f, current US brochure and dimensional drawing
Manufacturer North American reference · official technical document · accessed September 8, 2026 · status: Manufacturer verified