At a glance
Key specifications
Overall dimensions
Measurement basis: Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.
Precision visual reference
Dimensions and working range
Published measurements for the stated configuration. Illustration not to scale.
Overall Size
Measurement basis: Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.
Working Range
Measurement basis: Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.
Reference details
Overall measurement views reviewed 2026-09-07. Illustrative artwork, not a scale drawing.
Documented model generation; pictured options may differ from the measured configuration · North American manufacturer reference
Canonical reference: heavyeq.ca/specs/cold-planers/caterpillar/pm620/ · Printed from HeavyEQ.ca. Confirm the actual machine and current manufacturer documentation before transport or operation.
Year, generation & configuration
Model generation and configuration
- Generation / series
- PM620 product 124980
- Applicable region
- North American manufacturer reference
- Year handling
- Confirm the serial/PIN and production year when matching an individual machine to this reference.
Model identity
Model family, generation & status
- Model family
- Caterpillar PM620
- Generation / record
- PM620 product 124980
- Product status
- Listed on manufacturer product page — status checked September 2026
- Regional scope
- North American manufacturer reference
No verified lineage relationship published. HeavyEQ reviewed first-party sources and did not force a predecessor or successor from model numbering.
North American manufacturer reference
Verified specifications
Values retain their cited source, verification status and original publication basis. Imperial is presented first while manufacturer-published dual units and configuration context remain attached to every value.| Specification | Imperial | Metric | Standard / configuration | Source |
|---|---|---|---|---|
| Gross Power | 636 hp | 474 kW | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.Manufacturer verified | Caterpillar |
| Operating Weight | 69,575 lb | 31,559 kg | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Transport Length | 40 ft 9.4 in | 12.43 m | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Transport Width | 8 ft 1.7 in | 2.48 m | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Transport Height | 9 ft 10.1 in | 3 m | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Milling Width | 6 ft 7.1 in | 2,010 mm | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Maximum Milling Depth | 1 ft 1 in | 330 mm | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
| Maximum Truck Clearance | 15 ft 11.3 in | 4.86 m | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.Manufacturer verified | Caterpillar |
| Operating Length - Conveyor Up | 47 ft 7.7 in | 14.52 m | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Caterpillar |
What the specifications mean
Overall size uses the folded conveyor and lowered canopy. The raised conveyor and milling system describe the working setup and must not be used as transport measurements.
Milling width and depth are separate capabilities. Plan the cut and truck-loading geometry with the intended milling drum, material and site access rather than assuming all maxima occur in one production cycle.
Configuration intelligence
Configurations & specification differences
These observations are scoped to the cited generation and region. They are not a list of valid option combinations.
| Record | Verified observation | Scope |
|---|---|---|
| Reference configuration | Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system. | PM620 product 124980North American manufacturer reference |
A brochure configuration is not an individual marketplace machine. Serial/PIN and build information are required for exact verification.
Used PM620 inspection priorities
- Inspect cutting tools, holders, drum housing and wear protection under the manufacturer’s isolation procedure.
- Check conveyor belts, rollers, folding joints, water system and track condition.
- Review leveling controls, sensors, service history and the equipment required to move between transport and working configurations.
Configuration-aware inspection: these checks are triggered by machine category, installed configuration and technology package. Brochure-listed technology must be physically present, active, licensed and calibrated on the used machine.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Budget cutting-tool consumption and conveyor wear against the material and work pattern.
- Include truck availability, water supply and setup time in the production estimate; cutting width alone does not establish daily output.
Configuration
Equipment and configuration
Match the installed equipment to the serial-specific build record and the measurement basis shown above.
Configuration details to confirm
- Drum package
- Propulsion
- Conveyor folding
- Grade control
A model specification does not establish compatibility with a particular attachment or option.
Model-reference transport profile
Transport reference
Reference measurements retain their configuration and verification status. Confirm the actual transport setup before booking.
Measurement basis: Manufacturer transport configuration: conveyor folded and canopy lowered. Working values use conveyor raised and the standard 2010 mm milling system.
Reference specifications can differ from the actual configured machine. Confirm dimensions and weight before booking transportation.
Confirm or replace before a transport request
- actual weight
- actual travel length, width and height
- attachments and removable work tools
- bucket, blade, carriage or boom position
- loading condition
Source provenance
First-party sources and verification notes
Only manufacturer-authored records are linked publicly. Provisional measurements remain marked until a matching first-party record is confirmed.PM620 manufacturer specifications
North American manufacturer reference · exact model technical page · accessed September 6, 2026 · status: Manufacturer verified