At a glance
Key specifications
Overall dimensions
Measurement basis: W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f.
Precision visual reference
Dimensions and working range
Published measurements for the stated configuration. Illustration not to scale.
Overall Size
Measurement basis: W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f.
Working Range
Reference details
Visual visual:model-family:wirtgen:w-240-cri:depth · revision 1 · generated 2026-09-08
Documented model generation; decorative reference illustration · Manufacturer North American reference
Canonical reference: heavyeq.ca/specs/reclaimers-stabilizers/wirtgen/w-240-cri/ · Printed from HeavyEQ.ca. Confirm the actual machine and current manufacturer documentation before transport or operation.
Year, generation & configuration
Model generation and configuration
- Generation / series
- W 240 CRi US EPA Tier 4f, current CR-series US technical brochure
- Applicable region
- Manufacturer North American reference
- Year handling
- Confirm the serial/PIN and production year when matching an individual machine to this reference.
Model identity
Model family, generation & status
- Model family
- Wirtgen W 240 CRi
- Generation / record
- W 240 CRi US EPA Tier 4f, current CR-series US technical brochure
- Product status
- Production status not confirmed — status checked September 2026
- Regional scope
- Manufacturer North American reference
No verified lineage relationship published. HeavyEQ reviewed first-party sources and did not force a predecessor or successor from model numbering.
Manufacturer North American reference
Verified specifications
Values retain their cited source, verification status and original publication basis. Imperial is presented first while manufacturer-published dual units and configuration context remain attached to every value.| Specification | Imperial | Metric | Standard / configuration | Source |
|---|---|---|---|---|
| Length — folded conveyor drawing | 52 ft 4 in | 15,950 mm | W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Width — low-loader transport | 9 ft 10 in | 3,000 mm | W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Height — low-loader transport | 9 ft 10 in | 3,000 mm | W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Length — raised rear conveyor | 57 ft 3 in | 17,450 mm | Rear conveyor raised in the operating drawing.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Height — rear conveyor raised | 16 ft 9 in | 5,100 mm | Conveyor discharge position in operating drawing; not canopy height.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Height — operating canopy | 13 ft 7 in | 4,140 mm | Canopy and machine raised as shown in operating drawing.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Working width | 7 ft 8 in | 2,350 mm | W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Working depth — maximum | 1 ft 2 in | 350 mm | W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Belt width of discharge conveyor | 3 ft 7 in | 1,100 mm | W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
| Ground clearance — maximum | 1 ft 9 in | 530 mm | Maximum raised clearance in manufacturer ground-clearance diagram, not a guarantee at working depth.Manufacturer verifiedSafety-sensitive value — verify the exact machine. | Wirtgen |
What the specifications mean
The folded conveyor reduces length, but the operating discharge point needs considerably more space and height. Plan tanker, paver and truck movements around the complete train.
Working depth is subject to tolerances and wear in the manufacturer specification. Match the rotor and binder system to the engineered pavement design rather than choosing the deepest headline cut.
Configuration intelligence
Configurations & specification differences
These observations are scoped to the cited generation and region. They are not a list of valid option combinations.
| Record | Verified observation | Scope |
|---|---|---|
| Reference configuration | W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f. | W 240 CRi US EPA Tier 4f, current CR-series US technical brochureManufacturer North American reference |
A brochure configuration is not an individual marketplace machine. Serial/PIN and build information are required for exact verification.
Used W 240 CRi inspection priorities
- Inspect rotor holders and picks, conveyor condition and binder-injection equipment. Ask for maintenance and calibration records for the systems included on the actual machine.
- Verify the CRi engine/emissions plate and fitted rotor width; inspect track units and demonstrate conveyor folding and machine height adjustment.
Configuration-aware inspection: these checks are triggered by machine category, installed configuration and technology package. Brochure-listed technology must be physically present, active, licensed and calibrated on the used machine.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Price the recycler together with the support fleet, binder supply and experienced crew required for the chosen process. The machine alone does not define project output.
- Track wear costs for tooling and material-transfer components separately from engine hours, and check whether previous work used abrasive aggregate.
Configuration
Equipment and configuration
Match the installed equipment to the serial-specific build record and the measurement basis shown above.
Configuration details to confirm
- Application
- Rotor
- Binder system
- Water or emulsion system
A model specification does not establish compatibility with a particular attachment or option.
Model-reference transport profile
Transport reference
Reference measurements retain their configuration and verification status. Confirm the actual transport setup before booking.
Measurement basis: W 240 CRi with standard 2,350 mm milling/mixing rotor, rear conveyor folded and machine lowered for low-loader transport; canopy lowered, Caterpillar C27 EU Stage V / US EPA Tier 4f.
Reference specifications can differ from the actual configured machine. Confirm dimensions and weight before booking transportation.
Confirm or replace before a transport request
- actual weight
- actual travel length, width and height
- attachments and removable work tools
- bucket, blade, carriage or boom position
- loading condition
Source provenance
First-party sources and verification notes
Only manufacturer-authored records are linked publicly. Provisional measurements remain marked until a matching first-party record is confirmed.W 240 CRi US EPA Tier 4f, current CR-series US technical brochure
Manufacturer North American reference · official technical document · accessed September 8, 2026 · status: Manufacturer verified