Caterpillar 150 Next Gen Motor Grader Specs & Buying Research

At a glance

Key specifications

Blade Width12 ft3,657 mmCaterpillar 150 Next Gen — Moldboard. Published reference configuration; fitted options can vary.Manufacturer verified

Operating Weight - Typically Equipped45,012 lb20,417 kgCaterpillar 150 Next Gen — Weights. Published reference configuration; fitted options can vary.Manufacturer verified

Length — Front Axle to Rear Axle20 ft 1.6 in6,136 mm150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.Manufacturer verified

Net Power - ISO 9249/SAE J1349219 hp163 kWCaterpillar 150 Next Gen — Engine. Published reference configuration; fitted options can vary.Manufacturer verified

Overall dimensions

Length — Front Tire to Rear of Machine (Non AWD)29 ft 2.8 in8,911 mm150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.Manufacturer verified

Width – Outside Front Tires — Joystick, Non-AWD8 ft 5.7 in2,583 mm150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.Manufacturer verified

Height – Top of Cab11 ft 4 in3,454 mm150 Next Gen — Dimensions table reference tires; front tire to rear of machine unless push plate/ripper explicitly included. Width over front tires with moldboard angled for travel.Manufacturer verified

Precision visual reference

Dimensions and working range

Published measurements for the stated configuration. Illustration not to scale.

Reviewed visual

Caterpillar 150 Next Gen Motor Grader, illustrative side and front reference views; not a scale drawing. — Machine reference views

Overall Size

ALength — Front Tire to Rear of Machine (Non AWD)29 ft 2.8 in8,911 mm150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.Manufacturer verified

BWidth – Outside Front Tires — Joystick, Non-AWD8 ft 5.7 in2,583 mm150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.Manufacturer verified

CHeight – Top of Cab11 ft 4 in3,454 mm150 Next Gen — Dimensions table reference tires; front tire to rear of machine unless push plate/ripper explicitly included. Width over front tires with moldboard angled for travel.Manufacturer verified

Working Range

Blade Width12 ft3,657 mmCaterpillar 150 Next Gen — Moldboard. Published reference configuration; fitted options can vary.Manufacturer verified

Ground Clearance at Rear Axle1 ft 1.1 in333 mm150 Next Gen — Dimensions table reference tires; front tire to rear of machine unless push plate/ripper explicitly included. Width over front tires with moldboard angled for travel.Manufacturer verified

Reference details

Overall measurement views reviewed 2026-09-06. Illustrative artwork, not a scale drawing.

Documented model generation; confirm serial/PIN and installed configuration · United States / North American reference

Canonical reference: heavyeq.ca/specs/motor-graders/caterpillar/150-next-gen/ · Printed from HeavyEQ.ca. Confirm the actual machine and current manufacturer documentation before transport or operation.

Year, generation & configuration

Model generation and configuration

Generation / series: Current 150 Next Gen manufacturer record
Applicable region: United States / North American reference
Year handling: Confirm the serial/PIN and production year when matching an individual machine to this reference.

Model identity

Model family, generation & status

Model family: Caterpillar 150 Next Gen
Generation / record: Current 150 Next Gen manufacturer record
Product status: Current manufacturer model — status checked September 2026
Regional scope: United States / North American reference

No verified lineage relationship published. HeavyEQ reviewed first-party sources and did not force a predecessor or successor from model numbering.

United States / North American reference

Verified specifications

Values retain their cited source, verification status and original publication basis. Imperial is presented first while manufacturer-published dual units and configuration context remain attached to every value.

Qualified specifications with value-level verification status
Specification	Imperial	Metric	Standard / configuration	Source
Net Power - ISO 9249/SAE J1349	219 hp	163 kW	Caterpillar 150 Next Gen — Engine. Published reference configuration; fitted options can vary.Manufacturer verified	Caterpillar
Operating Weight - Typically Equipped	45,012 lb	20,417 kg	Caterpillar 150 Next Gen — Weights. Published reference configuration; fitted options can vary.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Blade Width	12 ft	3,657 mm	Caterpillar 150 Next Gen — Moldboard. Published reference configuration; fitted options can vary.Manufacturer verified	Caterpillar
Height – Top of Cab	11 ft 4 in	3,454 mm	150 Next Gen — Dimensions table reference tires; front tire to rear of machine unless push plate/ripper explicitly included. Width over front tires with moldboard angled for travel.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Ground Clearance at Rear Axle	1 ft 1.1 in	333 mm	150 Next Gen — Dimensions table reference tires; front tire to rear of machine unless push plate/ripper explicitly included. Width over front tires with moldboard angled for travel.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Length — Front Tire to Rear of Machine (Non AWD)	29 ft 2.8 in	8,911 mm	150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Width – Outside Front Tires — Joystick, Non-AWD	8 ft 5.7 in	2,583 mm	150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.Manufacturer verifiedSafety-sensitive value — verify the exact machine.	Caterpillar
Length — Front Axle to Rear Axle	20 ft 1.6 in	6,136 mm	150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.Manufacturer verified	Caterpillar

What the specifications mean

The published 150 Next Gen values remain attached to their stated configuration and rating basis.

150 Next Gen — Dimensions table reference tires; front tire to rear of machine unless push plate/ripper explicitly included. Width over front tires with moldboard angled for travel.

An individual machine must be verified by serial/PIN, installed equipment and actual measurements.

Configuration intelligence

Configurations & specification differences

These observations are scoped to the cited generation and region. They are not a list of valid option combinations.

Material configurations in this research record
Record	Verified observation	Scope
Drive & controls	150 Next Gen — Dimensions table reference tires; front tire to rear of machine unless push plate/ripper explicitly included. Width over front tires with moldboard angled for travel.	Current 150 Next Gen manufacturer recordUnited States / North American reference
Moldboard & front equipment	150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.	Current 150 Next Gen manufacturer recordUnited States / North American reference

A brochure configuration is not an individual marketplace machine. Serial/PIN and build information are required for exact verification.

Used 150 Next Gen inspection priorities

Measure circle, drawbar, saddle and moldboard wear through the full range of motion.
Inspect tandem cases, articulation, wheel lean, steering and tire condition.
Verify AWD and grade-control functions only when physically installed and operational.
Match the 150 Next Gen model plate, fitted attachment and undercarriage to the cited reference configuration.

Configuration-aware inspection: these checks are triggered by machine category, installed configuration and technology package. Brochure-listed technology must be physically present, active, licensed and calibrated on the used machine.

Hours, condition and ownership cost

Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.

Cost drivers to model

Circle and drawbar wear can materially change repair exposure and grading accuracy.
Tires, tandem drive, front axle and hydraulic functions need separate reserves.
Technology packages require hardware, calibration, subscriptions and support checks.

Compatibility graph

Attachment considerations

Relationships below identify relevant classes only unless a stronger evidence state is shown. They never assert exact used-attachment fitment.

relevant attachment class

Rear rippers and winches

Verify rear mounting, hydraulics, tool weight, manufacturer application.

Open attachment research

relevant attachment class

Dozer blades and application implements

Verify blade linkage, machine class, hydraulics, guarding.

Open attachment research

Before confirming fitment

generation and machine configuration
mounting interface, coupler or pin geometry
hydraulic flow, pressure, return and case drain
attachment weight and machine capacity limits
electrical controls or required machine options

Model-reference transport profile

Transport reference

Reference measurements retain their configuration and verification status. Confirm the actual transport setup before booking.

Manufacturer verifiedOperating Weight - Typically Equipped45,012 lb20,417 kgCaterpillar 150 Next Gen — Weights. Published reference configuration; fitted options can vary.

Manufacturer verifiedHeight – Top of Cab11 ft 4 in3,454 mm150 Next Gen — Dimensions table reference tires; front tire to rear of machine unless push plate/ripper explicitly included. Width over front tires with moldboard angled for travel.

Manufacturer verifiedLength — Front Tire to Rear of Machine (Non AWD)29 ft 2.8 in8,911 mm150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.

Manufacturer verifiedWidth – Outside Front Tires — Joystick, Non-AWD8 ft 5.7 in2,583 mm150 Next Gen — non-AWD reference with published tires; moldboard angled for travel, no push plate or ripper in base length.

Reference specifications can differ from the actual configured machine. Confirm dimensions and weight before booking transportation.

Confirm or replace before a transport request

actual weight
actual travel length, width and height
attachments and removable work tools
bucket, blade, carriage or boom position
loading condition

Source provenance

First-party sources and verification notes

Only manufacturer-authored records are linked publicly. Provisional measurements remain marked until a matching first-party record is confirmed.

Caterpillar

Cat® 150 Motor Grader | Reliable Road Grading with Advanced Technology | Cat | Caterpillar

United States / North American reference · exact model technical page · accessed September 6, 2026 · status: Manufacturer verified

Open source