Sell Equipment

Motor Grader · verified CASE data

CASE 856D Motor Grader

The 856D D-series reference uses the AWD arrangement with a front blade, rear ripper and low-profile cab. Its brochure lists four different attachment-dependent lengths; this page follows the front-blade and rear-ripper column.

Published Verified September 2026 Current manufacturer catalogue 1 public first-party source
Explore equipment for saleJump to marketplace matches below

Your equipment decisions

Save, share or improve this record

Saved interest is private and does not verify a machine or its owner. HeavyEQ displays no synthetic activity counts.

At a glance

Key specifications

Moldboard width — selected listed option12 ft 0.1 in3,660 mmAuthorized dealer verified
Wheelbase19 ft 9.1 in6,023 mmAuthorized dealer verified
Ground clearance — front axle1 ft 9.8 in554 mmAuthorized dealer verified

Overall dimensions

Total length — front blade and rear ripper32 ft 11.4 in10,044 mmAuthorized dealer verified
Overall width — outside tires8 ft 4.6 in2,555 mmAuthorized dealer verified
Low-profile cab height10 ft 4 in3,150 mmAuthorized dealer verified

Measurement basis: European Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.

Precision visual reference

Dimensions and working range

Published measurements for the stated configuration. Illustration not to scale.

Reviewed visual
Imperial first · metric reference
CASE 856D Motor Grader, illustrative side and front reference views; not a scale drawing.
Machine reference views

Overall Size

Measurement basis: European Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.

ATotal length — front blade and rear ripper32 ft 11.4 in10,044 mmAuthorized dealer verified
BOverall width — outside tires8 ft 4.6 in2,555 mmAuthorized dealer verified
CLow-profile cab height10 ft 4 in3,150 mmAuthorized dealer verified

Working Range

Measurement basis: European Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.

Moldboard width — selected listed option12 ft 0.1 in3,660 mmAuthorized dealer verified
Wheelbase19 ft 9.1 in6,023 mmAuthorized dealer verified
Ground clearance — front axle1 ft 9.8 in554 mmAuthorized dealer verified
Reference details

Overall measurement views reviewed 2026-09-06. Illustrative artwork, not a scale drawing.

Documented model generation; confirm serial/PIN and installed configuration · Europe / EU Stage V reference

Canonical reference: heavyeq.ca/specs/motor-graders/case/856d/ · Printed from HeavyEQ.ca. Confirm the actual machine and current manufacturer documentation before transport or operation.

Year, generation & configuration

Model generation and configuration

Generation / series
D-series EU Stage V brochure; explicitly European AWD reference configuration
Applicable region
Europe / EU Stage V reference
Year handling
Confirm the serial/PIN and production year when matching an individual machine to this reference.

Model identity

Model family, generation & status

Model family
CASE 856D
Generation / record
D-series EU Stage V brochure; explicitly European AWD reference configuration
Product status
Current manufacturer catalogue — status checked September 2026
Regional scope
Europe / EU Stage V reference

No verified lineage relationship published. HeavyEQ reviewed first-party sources and did not force a predecessor or successor from model numbering.

Europe / EU Stage V reference

Verified specifications

Values retain their cited source, verification status and original publication basis. Imperial is presented first while manufacturer-published dual units and configuration context remain attached to every value.
Qualified specifications with value-level verification status
SpecificationImperialMetricStandard / configurationSource
Total length — front blade and rear ripper32 ft 11.4 in10,044 mmEuropean Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.Authorized dealer verifiedSafety-sensitive value — verify the exact machine.First-party citation pending
Overall width — outside tires8 ft 4.6 in2,555 mmEuropean Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.Authorized dealer verifiedSafety-sensitive value — verify the exact machine.First-party citation pending
Low-profile cab height10 ft 4 in3,150 mmEuropean Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.Authorized dealer verifiedSafety-sensitive value — verify the exact machine.First-party citation pending
Wheelbase19 ft 9.1 in6,023 mmEuropean Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.Authorized dealer verifiedFirst-party citation pending
Ground clearance — front axle1 ft 9.8 in554 mmEuropean Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.Authorized dealer verifiedSafety-sensitive value — verify the exact machine.First-party citation pending
Moldboard width — selected listed option12 ft 0.1 in3,660 mmEuropean Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.Authorized dealer verifiedFirst-party citation pending

What the specifications mean

01

The published 856D values remain attached to their stated configuration and rating basis.

02

European Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.

03

An individual machine must be verified by serial/PIN, installed equipment and actual measurements.

Configuration intelligence

Configurations & specification differences

These observations are scoped to the cited generation and region. They are not a list of valid option combinations.

Material configurations in this research record
RecordVerified observationScope
Drive & controlsEuropean Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.D-series EU Stage V brochure; explicitly European AWD reference configurationEurope / EU Stage V reference
Moldboard & front equipmentWorking dimensions apply to the stated attachment and linkage; alternate attachments change the range.D-series EU Stage V brochure; explicitly European AWD reference configurationEurope / EU Stage V reference
Rear equipment & grade controlTire, track, counterweight and rear attachment options change transport dimensions and operating weight.D-series EU Stage V brochure; explicitly European AWD reference configurationEurope / EU Stage V reference

A brochure configuration is not an individual marketplace machine. Serial/PIN and build information are required for exact verification.

Used 856D inspection priorities

  • Measure circle, drawbar, saddle and moldboard wear through the full range of motion.
  • Inspect tandem cases, articulation, wheel lean, steering and tire condition.
  • Verify AWD and grade-control functions only when physically installed and operational.
  • Match the 856D model plate, fitted equipment and serial/PIN to the cited generation and configuration.

Configuration-aware inspection: these checks are triggered by machine category, installed configuration and technology package. Brochure-listed technology must be physically present, active, licensed and calibrated on the used machine.

Hours, condition and ownership cost

Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.

Cost drivers to model

  • Circle and drawbar wear can materially change repair exposure and grading accuracy.
  • Tires, tandem drive, front axle and hydraulic functions need separate reserves.
  • Technology packages require hardware, calibration, subscriptions and support checks.

Compatibility graph

Attachment considerations

Relationships below identify relevant classes only unless a stronger evidence state is shown. They never assert exact used-attachment fitment.

relevant attachment class

Rear rippers and winches

Verify rear mounting, hydraulics, tool weight, manufacturer application.

Open attachment research
relevant attachment class

Dozer blades and application implements

Verify blade linkage, machine class, hydraulics, guarding.

Open attachment research

Before confirming fitment

  • generation and machine configuration
  • mounting interface, coupler or pin geometry
  • hydraulic flow, pressure, return and case drain
  • attachment weight and machine capacity limits
  • electrical controls or required machine options

Model-reference transport profile

Transport reference

Reference measurements retain their configuration and verification status. Confirm the actual transport setup before booking.

Authorized dealer verifiedTotal length — front blade and rear ripper32 ft 11.4 in10,044 mm
Authorized dealer verifiedOverall width — outside tires8 ft 4.6 in2,555 mm
Authorized dealer verifiedLow-profile cab height10 ft 4 in3,150 mm

Measurement basis: European Stage V D-series, AWD, front dozer blade and rear ripper, low-profile cab, 17.5R25EM tires; moldboard rotated into transport tire envelope. All dimensions from one configured column in the European brochure.

Reference specifications can differ from the actual configured machine. Confirm dimensions and weight before booking transportation.

Confirm or replace before a transport request

  • actual weight
  • actual travel length, width and height
  • attachments and removable work tools
  • bucket, blade, carriage or boom position
  • loading condition

Source provenance

First-party sources and verification notes

Only manufacturer-authored records are linked publicly. Provisional measurements remain marked until a matching first-party record is confirmed.
CASE

856D official product record

North America; identity reference · exact model technical page · accessed September 6, 2026 · status: Manufacturer verified

Open source

This page describes a model family using cited manufacturer information. It is not a listing, appraisal, load chart, attachment approval or transport determination. Verify the serial-specific machine and current documentation before purchase or operation.

Equipment for sale

CASE 856D equipment for sale

No matching HeavyEQ marketplace listing is displayed for this motor graders selection yet.

List oneBrowse equipment for saleCompare models