HeavyEQ parts intelligence
Wirtgen Parts & Model Identification
Research first. Identify the installed component. Confirm the application.
Manufacturer source guide · Original identification research
Use the correct parts source
The official group portal separates Wirtgen cutting tools, milling drums, conveyor units and undercarriage.
Tooling research should distinguish the milling system from the machine chassis; selecting a machine series is only the first step.
Source geography: Global portal; confirm Canadian supply. Confirm the documentation and supplying channel for the actual machine’s market.
Prepare the identification record
- Record machine serial and full W designation.
- Identify fitted drum, tool-holder system and working configuration.
- Confirm the relevant regional catalogue and exact item with the supply partner.
Keep full serial/PIN and contact information out of public descriptions and photographs. Use the manufacturer’s appropriate channel for private serial-specific checks. A successful search does not replace inspection of the currently installed assembly.
Wirtgen Group Parts Search ↗ · independently reviewed 2026-10-15. Public reference for original commentary; manufacturer diagrams, catalogue tables and stock are not copied here.
Existing HeavyEQ equipment context
6 accepted equipment identities connect this manufacturer with 3 equipment categories. Generation and regional context remain on their existing specification pages. These links establish discovery coverage, not verified parts applications.
Wirtgen SP 15i Concrete Paver
Concrete Pavers · SP15i US EPA Tier4f, US brochure 02/23
North American manufacturer referenceWirtgen W 50 Ri Cold Planer
Cold Planer · W 50 Ri US EPA Tier 4f, current US brochure and dimensional drawing
Manufacturer North American referenceWirtgen W 35 Ri Cold Planer
Cold Planer · W 35 Ri EU Stage V, current English technical brochure
Manufacturer European EU Stage V referenceWirtgen W 240 CRi Reclaimer / Stabilizer
Reclaimer / Stabilizer · W 240 CRi US EPA Tier 4f, current CR-series US technical brochure
Manufacturer North American referenceWirtgen SP 64i Concrete Paver
Concrete Paver · SP 64i US EPA Tier 4f, current US SP61–SP64i technical brochure
Manufacturer North American referenceWirtgen SP 25i Concrete Paver
Concrete Paver · SP 25i EU Stage V / US EPA Tier 4f, current English technical brochure
Manufacturer EU Stage V / US EPA Tier 4f international referenceComponent and sourcing context
- Cold Planers: component systems and identification questions
- Reclaimers and Stabilizers: component systems and identification questions
- Concrete Pavers: component systems and identification questions
Identify the engine, pump, axle, transmission or other tagged assembly independently of the carrier. An aftermarket issuer’s number and a seller stock code remain separate from the machine OEM’s identity. Ask a supplier to identify the documentation behind any cross-reference and the conditions attached to a proposed replacement.
Historical and generation research
These 2 source-supported designations come from the legacy research queue. Some still have current regional product pages. Only records explicitly presented as past or non-current by the cited OEM carry that context; the queue alone does not prove discontinuation.
Wirtgen W 120 F
OEM-supported designation · Historical/discontinued status not established
OEM current regional W120F page confirms designation. A newer F-series generation exists; the bare historical candidate needs generation/serial reconciliation.
W120F identifies a milling-machine model but does not distinguish every generation. Match machine serial, regional engine/emissions specification and milling-drum configuration before selecting parts.
The page describes alternative drum widths and tool spacings. Record the installed drum and toolholder system instead of assigning one cutter or holder across every W120F.
- Evidence region / context
- Pakistan regional product page
- Production period
- Not established for the complete designation
Do not infer model years, serial breaks, machine compatibility or interchange from a family designation.
Use this section to retain the exact designation and its source context. A parts request still needs identification of the currently installed assembly.
Wirtgen W120F Compact milling machine ↗ · reviewed 2026-10-15. Identity evidence does not import a part application, even where the source is an item’s model list.
Wirtgen W 2000
OEM-supported designation · Historical/discontinued status not established
OEM timeline explicitly identifies W2000 in its1999 milestone. Milestone year is not proof of complete production interval.
- Evidence region / context
- Canadian OEM history page
- Production period
- Not established for the complete designation
Do not infer model years, serial breaks, machine compatibility or interchange from a family designation.
Use this section to retain the exact designation and its source context. A parts request still needs identification of the currently installed assembly.
Wirtgen History of cold milling ↗ · reviewed 2026-10-15. Identity evidence does not import a part application, even where the source is an item’s model list.
Request or offer an actual item
Keep a catalogue identity separate from available stock. For a used or rebuilt assembly, describe its donor and inspection evidence, installed position, item condition and what the quote includes. A supplier’s statement remains attributable to the supplier until independently verified.