Equipment families and research paths
Explore Kleemann equipment by machine type, then compare models and specifications.
Kleemann Crushers
Jaw, cone, impact and gyratory crushing units or complete plants with the sold assembly clearly identified.
ExploreKleemann Screeners
Standalone screening machines and complete screen-only plants; classify by the screening mechanism.
ExploreKleemann Conveyors, Feeders and Stackers
Separately identified bulk feeders, transfer conveyors and stockpiling stackers.
ExploreModel families & generations
Explore model families, generations and configurations.Kleemann MC 110i EVO2 Crusher
MC110i EVO2 US spec o251322v101 · North American manufacturer reference
- Crusher inlet width
- 3 ft 8 in1,117.6 mm
- Crusher inlet depth
- 2 ft 4 in711.2 mm
- Feed height — without extension
- 12 ft 10 in3,911.6 mm
Kleemann MSS 802i EVO Screener
MSS802i EVO US technical sheet o215140v101 · North American manufacturer reference
- Top deck width
- 5 ft 1 in1,549.4 mm
- Top deck length
- 16 ft 0 in4,876.8 mm
- Feed height approx. — hopper rear wall raised
- 11 ft 9 in3,581.4 mm
Kleemann MBT 24i Mobile Stacker
MOBIBELT MBT24i US sheet o247919v101 · North American manufacturer reference
- Belt conveyor length
- 74 ft 6 in22,707.6 mm
- Belt conveyor width
- 3 ft 3 in990.6 mm
- Discharge height approx. at 23° belt inclination
- 33 ft 2 in10,109.2 mm
Kleemann MCO 90i EVO2 Crusher
MCO 90i EVO2 US specification, current technical data with post-screen options · Manufacturer North American reference
- Crusher discharge height approx.
- 10 ft 10 in3,302 mm
- Transport length without options
- 52 ft 6 in16,002 mm
- Crusher diameter
- 3 ft 2 in965.2 mm
Kleemann MR 110i EVO2 Crusher
MR 110i EVO2 US technical data, Scania Tier 4f / Stage IV · Manufacturer North American reference
- Crusher inlet width
- 3 ft 8 in1,117.6 mm
- Feed height — without extension
- 13 ft 9 in4,191 mm
- Discharge height approx.
- 11 ft 8 in3,556 mm
Representative families to research
- MC 110i EVO2
- MSS 802i EVO
- MBT 24i
Used-equipment buying priorities
- Confirm serial-specific model, generation and configuration
- Compare service support and parts availability for the operating region
- Inspect category-specific wear systems rather than relying on hours alone
- Verify installed technology, attachments and documentation separately