Canada reference
Verified specifications
Values are manufacturer-published or faithfully converted from the cited manufacturer record. Manufacturer-published dual units are retained where available, and the basis column travels with every value.| Specification | Metric | Imperial | Standard / configuration |
|---|---|---|---|
| Gross engine power | 30.1 kW | 40.3 hp | SAE J1995 · At 2,200 rpm |
| Net engine power | 29.2 kW | 39.1 hp | SAE J1349 · At 2,200 rpm |
| Operating weight | 4,165 kg | 9,182 lb | Manufacturer reference configuration; confirm canopy/cab, tracks, blade, coupler and attachments |
| Overall length | 5,085 mm | 200.1 in | Manufacturer-published machine dimension |
| Overall width | 1,700 mm | 66.9 in | Manufacturer-published machine dimension |
| Overall height | 2,480 mm | 97.6 in | Manufacturer-published machine dimension |
| Hydraulic flow | 110 L/min | 29.1 US gpm | Manufacturer-published main pump capacity |
| Breakout force | 4,262 kgf | 9,397 lbf | Manufacturer-published bucket breakout force |
| Maximum digging depth | 3.40 m | 11 ft 2 in | Kubota Canada series record |
What the specifications mean
Gross SAE J1995 and net SAE J1349 output remain separate technical identities.
The 4,165 kg / 9,182 lb value is the detailed model-page operating weight, not the rounded 4.6-ton series card.
Hydraulic pump capacity and breakout force are screening values; attachment flow, pressure and configuration still need confirmation.
Configurations and options to verify
- Canopy and cab forms and rubber or steel tracks are listed; confirm the exact build before transport planning.
- Angle-blade and six-way-blade choices change function and weight.
- Rear camera, coupler and attachment packages must be verified on the candidate machine.
Used KX040-5 inspection priorities
- Check rubber tracks, sprockets, rollers and idlers together; inspect final-drive leakage and travel response.
- Measure boom, arm, bucket, swing-post and blade-pin play, then test drift under load.
- Operate auxiliary hydraulics and the coupler with the intended tool where practical.
- Verify safety interlocks, display warnings, service access and cold-start behaviour.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Track-system wear, compact access repairs and attachment utilization shape hourly cost.
- Separate idle hours from productive duty and review daily greasing and service evidence.
- Include trailer, tow vehicle, loading equipment and attachment changes in mobilization cost.
Attachments and compatibility
- Confirm pin pickup or coupler interface, tool weight and hydraulic requirements.
- Buckets, breakers, thumbs, augers and compactors can require different plumbing or controls.
- Check blade and counterweight configuration when attachment stability matters.
Transport planning
- Use scale-ready operating weight plus the actual bucket, coupler, blade and fluids—not the rounded machine class.
- Measure width and height in travel condition and confirm trailer, axle and tow-vehicle limits independently.
Manufacturer provenance
Sources and verification notes
Each exact value above points to one of these first-party records.Kubota Canada
Open manufacturer source KX040-5 Mini-Excavator — Detailed Specifications
Canada · exact model technical page · verified August 2026 · confidence: manufacturer-verified
Kubota Canada
Open manufacturer source KX040-5 Series Mini-Excavators
Canada · model-series technical page · verified August 2026 · confidence: manufacturer-verified