Australia/Oceania reference configuration
Verified specifications
Values are manufacturer-published or faithfully converted from the cited manufacturer record. Manufacturer-published dual units are retained where available, and the basis column travels with every value.| Specification | Metric | Imperial | Standard / configuration |
|---|---|---|---|
| Engine power (rating basis unconfirmed) | 123 kW | 165 hp | Manufacturer product-page rating |
| Operating weight | 23,240 kg | 51,235 lb | Australia/Oceania product configuration |
| Bucket capacity | 0.97 m³ | 1.27 yd³ | Published reference bucket |
What the specifications mean
Use the regional qualifier whenever carrying these figures into a comparison.
The published bucket is a reference, not the only compatible size.
Long undercarriage improves the stability envelope but adds wear components and transport width considerations.
Configurations and options to verify
- Regional emissions and standard-equipment packages can differ from Canadian-market machines.
- Arm, bucket, shoes and guarding change working range and operating weight.
- Confirm intelligent-machine-control suffixes and installed technology separately.
Used PC210LC-11 inspection priorities
- Measure links, bushings, rollers, idlers and sprockets against service limits—not by appearance alone.
- Cycle boom, arm, bucket and swing under load; check cylinders, drift, linkage play and slew bearing movement.
- Review cold-start behaviour, fault history, emissions-system records and installed grade-control hardware.
- Confirm auxiliary circuits, coupler controls and included work tools in operation.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Undercarriage remaining life and travel duty can dominate near-term repair exposure.
- Pins, bushings, cylinders, pumps and emissions components should be priced from inspection evidence.
- Fuel, operator, attachment wear, transport and expected annual utilization belong in a total-cost model.
Attachments and compatibility
- Record coupler or pin geometry before comparing buckets, thumbs or breakers.
- Match breaker and processor weight, flow, pressure, return and case-drain requirements.
- Include attachment weight when checking stability, lift information and transport.
Transport planning
- Record actual travel length, width, height and weight with the fitted boom, arm, shoes, counterweight and work tool.
- State what remains installed and what travels separately; carriers must confirm route and permit requirements.
Manufacturer provenance
Sources and verification notes
Each exact value above points to one of these first-party records.Komatsu
Open manufacturer source PC210LC-11 Mid-Size Excavator
Australia · exact model technical page · verified August 2026 · confidence: manufacturer-verified