United States reference
Verified specifications
Values are manufacturer-published or faithfully converted from the cited manufacturer record. Manufacturer-published dual units are retained where available, and the basis column travels with every value.| Specification | Metric | Imperial | Standard / configuration |
|---|---|---|---|
| Engine power (rating basis unconfirmed) | 83.0 kW | 111.3 hp | At 2,400 rpm |
| Rated operating capacity (35% tipping load) | 1,863 kg | 4,107 lb | SAE J818 · 35% of tipping load |
| Tipping load | 5,324 kg | 11,737 lb | Manufacturer reference configuration |
| Operating-weight range | 5,835–5,985 kg | 12,860–13,190 lb | Canopy to cab |
| Hydraulic flow | 88.0 / 153.0 L/min | 23.2 / 40.4 US gpm | Primary / optional high flow |
What the specifications mean
SAE J818 and the 35% basis make this ROC suitable for a like-basis comparison.
The machine and tool combination can create significant trailer payload and axle-distribution demands.
Large hydraulic flow expands tool capability but also raises cooling and maintenance scrutiny.
Configurations and options to verify
- Takeuchi publishes distinct canopy and cab weights.
- Optional counterweight raises the listed operating capacity to 4,815 lb.
- High-flow and second-circuit plumbing must be identified on the individual machine.
Used TL12V2 inspection priorities
- Inspect tracks, sprockets, rollers, idlers and final drives as a complete wear system.
- Check loader-arm pivots, coupler lock, lift and tilt cylinders, and frame or tower repairs.
- Test standard or high-flow auxiliary hydraulics under load and confirm cooling performance.
- Verify restraint bar, interlocks, controls, camera and two-speed travel where equipped.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Track-system replacement and debris exposure often matter more than headline hours.
- Hydraulic-powered attachments can materially change fuel use, cooling demand and wear.
- Model utilization, attachment depreciation, transport and surface-restoration costs separately.
Attachments and compatibility
- Universal-style mounting does not confirm hydraulic or electrical compatibility.
- Match flow, pressure, case drain, electrical harness, tool weight and machine stability.
- Compare rated capacity only on the same tipping-load basis.
Transport planning
- Record machine weight with cab, tracks, counterweights, coupler and fitted attachment.
- Measure overall width and height; verify trailer payload and axle distribution for the complete load.
Manufacturer provenance
Sources and verification notes
Each exact value above points to one of these first-party records.Takeuchi US
Open manufacturer source TL12V2 Specs and Dimensions
United States · exact model technical page · verified August 2026 · confidence: manufacturer-verified