Canada reference
Verified specifications
Values are manufacturer-published or faithfully converted from the cited manufacturer record. Manufacturer-published dual units are retained where available, and the basis column travels with every value.| Specification | Metric | Imperial | Standard / configuration |
|---|---|---|---|
| Gross engine power | 55.4 kW | 74.3 hp | At 2,400 rpm |
| Rated operating capacity (35% tipping load) | 1,129 kg | 2,490 lb | 35% of tipping load |
| Operating capacity (50% tipping load) | 1,613 kg | 3,557 lb | 50% of tipping load |
| Operating weight | 4,273 kg | 9,420 lb | Closed-cab published configuration |
| Hydraulic flow | 72.7 / 112.8 L/min | 19.2 / 29.8 US gpm | Standard / high flow |
What the specifications mean
The 35% figure is the appropriate line for like-basis track-loader comparisons.
High flow expands tool options only when pressure, return, cooling and controls also match.
Cab configuration should remain attached to the weight value.
Configurations and options to verify
- Kubota lists open- and closed-cab versions; the cited operating weight is the closed-cab figure.
- Standard and high-flow auxiliary packages are published separately.
- Counterweights, track and attachment choices must be added to the transport record.
Used SVL75-3 inspection priorities
- Inspect tracks, sprockets, rollers, idlers and final drives as a complete wear system.
- Check loader-arm pivots, coupler lock, lift and tilt cylinders, and frame or tower repairs.
- Test standard or high-flow auxiliary hydraulics under load and confirm cooling performance.
- Verify restraint bar, interlocks, controls, camera and two-speed travel where equipped.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Track-system replacement and debris exposure often matter more than headline hours.
- Hydraulic-powered attachments can materially change fuel use, cooling demand and wear.
- Model utilization, attachment depreciation, transport and surface-restoration costs separately.
Attachments and compatibility
- Universal-style mounting does not confirm hydraulic or electrical compatibility.
- Match flow, pressure, case drain, electrical harness, tool weight and machine stability.
- Compare rated capacity only on the same tipping-load basis.
Transport planning
- Record machine weight with cab, tracks, counterweights, coupler and fitted attachment.
- Measure overall width and height; verify trailer payload and axle distribution for the complete load.
Manufacturer provenance
Sources and verification notes
Each exact value above points to one of these first-party records.Kubota Canada
Open manufacturer source SVL75-3 Compact Track Loader
Canada · exact model technical page · verified August 2026 · confidence: manufacturer-verified