United States / North American reference
Verified specifications
Values are manufacturer-published or faithfully converted from the cited manufacturer record. Manufacturer-published dual units are retained where available, and the basis column travels with every value.| Specification | Metric | Imperial | Standard / configuration |
|---|---|---|---|
| Gross engine power | 80.9 kW | 108.5 hp | Manufacturer-published gross output |
| Rated operating capacity (basis unconfirmed) | 1,748 kg | 3,850 lb | Manufacturer product page; confirm test basis |
| Operating weight | 5,531 kg | 12,183 lb | Manufacturer reference configuration |
What the specifications mean
Gross power should not be ranked against another manufacturer's net rating.
Published operating weight is already substantial before a bucket or tool is added.
Capacity without a common test basis should remain qualified in a comparison.
Configurations and options to verify
- Hydraulic flow package, tracks, cab and counterweights require machine-level confirmation.
- The published ROC basis should be checked in the current manual before cross-brand ranking.
- Attachment controls and electrical connectors can vary by build.
Used 333 P-Tier inspection priorities
- Inspect tracks, sprockets, rollers, idlers and final drives as a complete wear system.
- Check loader-arm pivots, coupler lock, lift and tilt cylinders, and frame or tower repairs.
- Test standard or high-flow auxiliary hydraulics under load and confirm cooling performance.
- Verify restraint bar, interlocks, controls, camera and two-speed travel where equipped.
Hours, condition and ownership cost
Hours are context, not a condition grade. Duty cycle, idle time, maintenance evidence, wear-system measurements, structural repairs and installed technology should be evaluated together.
Cost drivers to model
- Track-system replacement and debris exposure often matter more than headline hours.
- Hydraulic-powered attachments can materially change fuel use, cooling demand and wear.
- Model utilization, attachment depreciation, transport and surface-restoration costs separately.
Attachments and compatibility
- Universal-style mounting does not confirm hydraulic or electrical compatibility.
- Match flow, pressure, case drain, electrical harness, tool weight and machine stability.
- Compare rated capacity only on the same tipping-load basis.
Transport planning
- Record machine weight with cab, tracks, counterweights, coupler and fitted attachment.
- Measure overall width and height; verify trailer payload and axle distribution for the complete load.
Manufacturer provenance
Sources and verification notes
Each exact value above points to one of these first-party records.John Deere
Open manufacturer source 333 P-Tier Compact Track Loader
United States · exact model technical page · verified August 2026 · confidence: manufacturer-verified