Verified model comparison
Compare the intended profile or slab, mould package and worksite logistics before selecting the carrier.
Specify the profile or slab geometry, line and level requirements, concrete supply and site access. The records describe different slipform packages and should not be treated as interchangeable based on power or track count. Confirm the exact mould and machine arrangement with the manufacturer.
Track positions, moulds, conveyors and detachable equipment change the transport envelope. Read each record’s included-equipment basis and unresolved exceptions before planning a haul. An operating photograph does not identify the required dismantling sequence or the mass of separate loads.
Inspect mould wear, vibrators, conveyor or auger equipment, tracks and steering/grade controls. Confirm sensors, software and accessories actually included. Compare setup, cleaning, concrete delivery and transport as part of the ownership scenario rather than assuming maximum paving width predicts output.
Generation/configuration-aware: measurement basis and reference configuration travel with each value. A difference in basis is not treated as a performance difference.
| Specification | Wirtgen SP 25i Concrete Paver | Wirtgen SP 64i Concrete Paver |
|---|---|---|
| Transport length — basic machine with belt conveyor | 27 ft 2.8 in8,300 mmSP 25i Deutz TCD 4.1 L4 Stage V / Tier 4f, basic machine with standard belt conveyor in transport position. Manufacturer minimum dimensions exclude a mounted offset mold; optional folding and auger conveyors have different lengths. | 29 ft 6 in9,000 mmSP 64i four-track US machine, Deutz TCD 6.1 L6 Tier 4f, 12 ft paving-width package with type 1300 wi slab mold, spreading plow and super smoother; transport configuration. |
| Transport width — basic machine with belt conveyor | 8 ft 2.4 in2,500 mmSP 25i Deutz TCD 4.1 L4 Stage V / Tier 4f, basic machine with standard belt conveyor in transport position. Manufacturer minimum dimensions exclude a mounted offset mold; optional folding and auger conveyors have different lengths. | 9 ft 10 in3,000 mmSP 64i four-track US machine, Deutz TCD 6.1 L6 Tier 4f, 12 ft paving-width package with type 1300 wi slab mold, spreading plow and super smoother; transport configuration. |
| Transport height — basic machine with belt conveyor | 9 ft 8.1 in2,950 mmSP 25i Deutz TCD 4.1 L4 Stage V / Tier 4f, basic machine with standard belt conveyor in transport position. Manufacturer minimum dimensions exclude a mounted offset mold; optional folding and auger conveyors have different lengths. | 10 ft 2 in3,100 mmSP 64i four-track US machine, Deutz TCD 6.1 L6 Tier 4f, 12 ft paving-width package with type 1300 wi slab mold, spreading plow and super smoother; transport configuration. |
| Max. mold height — offset | 6 ft 6.7 in2,000 mmOffset concrete kit; special applications require factory confirmation. | 4 ft 3 in1,300 mmOptional offset mold up to 4 ft 3 in high, maximum base width 2 ft, including hopper; not the standard slab setup. |
| Max. mold width — offset | 8 ft 2.4 in2,500 mmOffset concrete kit; not the optional inset slab width. | Not published in this research record |
| Lateral adjustment of mold | 3 ft 7.3 in1,100 mmOffset concrete kit. | Not published in this research record |
| Slab paving mold — maximum inset width | 11 ft 5.8 in3,500 mmOptional inset concrete kit, published range 1,000–3,500 mm. | 24 ft7,315.2 mmUS brochure maximum slab paving width. DBI configurations limited to 20 ft; availability depends on installed equipment. |
| Max. layer thickness — inset | 1 ft 3.7 in400 mmOptional inset concrete kit. | 1 ft 6 in450 mmStandard brochure maximum; not all width and equipment combinations available. |
| Belt conveyor length | 16 ft 0.9 in4,900 mmSP 25i Deutz TCD 4.1 L4 Stage V / Tier 4f, basic machine with standard belt conveyor in transport position. Manufacturer minimum dimensions exclude a mounted offset mold; optional folding and auger conveyors have different lengths. | Not published in this research record |
| Belt conveyor width | 1 ft 11.6 in600 mmSP 25i Deutz TCD 4.1 L4 Stage V / Tier 4f, basic machine with standard belt conveyor in transport position. Manufacturer minimum dimensions exclude a mounted offset mold; optional folding and auger conveyors have different lengths. | Not published in this research record |
| Operating length — excluding longitudinal joint tie bar inserter | Not published in this research record | 27 ft 9 in8,450 mmOperating drawing with spreader, type 1300 wi slab mold and super smoother, excluding longitudinal joint tie bar inserter. |
A configurable slipform paver supporting both offset profiles and inset slabs. The reference keeps those two working ranges distinct and identifies what is excluded from its minimum transport dimensions.
ExploreA four-track slipform paver for slab work with documented optional offset equipment. The transport reference follows one complete 12 ft paving package rather than an undefined maximum-width machine.
ExploreCarry utilization, fuel, wear, attachments and transport into an editable planning model.
ExploreNo winner is declared. Job fit depends on configuration, condition, dealer support, attachments, transport and cost assumptions beyond these published figures.