Verified model comparison

McCloskey J40 vs Kleemann MC 110i EVO2: primary jaw-plant fit

Compare feed preparation, receiving equipment and transport arrangements for two jaw-plant candidates.

Start with the feed stream

Document maximum feed dimensions, grading, contamination and material properties. Compare the manufacturer inlet and feeder references, but ask for application support before assigning a production rate. Material preparation upstream can change whether either plant fits the task.

Lay out the whole plant

Check excavator or loader access to the hopper, main discharge height, stockpile space and any side conveyor. The J40 side-discharge-height source contains a malformed unit and remains unresolved. Do not infer that height from the main conveyor or a photograph.

Inspect the working system

Inspect jaw dies, toggle-related components, feeder and grizzly, conveyor belts and tracked undercarriage under the manufacturer isolation procedure. Price the same ready-to-process package, including magnets, dust controls and downstream equipment only where actually supplied.

Questions that decide the shortlist

  • What feed preparation is required?
  • Will both plants connect to the intended receiving equipment?
  • Which wear, options and transport-preparation costs are included?
McCloskey J40 CrusherJ40 Jaw Crusher, manufacturer technical brochure copyright 2023Manufacturer North American reference
Kleemann MC 110i EVO2 CrusherMC110i EVO2 US spec o251322v101North American manufacturer reference

Generation/configuration-aware: measurement basis and reference configuration travel with each value. A difference in basis is not treated as a performance difference.

McCloskey J40 vs Kleemann MC 110i EVO2: primary jaw-plant fit manufacturer-published specifications
SpecificationMcCloskey J40 CrusherKleemann MC 110i EVO2 Crusher
Transport length45 ft 2.6 in13.78 mJ40 tracked jaw crusher in transport configuration, as shown in the 2023 brochure. Optional hopper extensions and additional equipment must be checked on the actual machine.49 ft 3 in*15,011.4 mm*US diesel-direct plant, folded transport state, side discharge conveyor retained. Current technical-sheet transport length; older brochure length differs and requires configuration confirmation. Provisional: manufacturer publications conflict; technical-sheet value selected pending confirmation. Technical sheet:49 ft3 in; general brochure:46 ft4 in. The equipment difference has not been confirmed.
Transport width8 ft 2.5 in2.50 mJ40 tracked jaw crusher in transport configuration, as shown in the 2023 brochure. Optional hopper extensions and additional equipment must be checked on the actual machine.9 ft 10 in2,997.2 mmUS diesel-direct plant, folded transport state, side discharge conveyor retained. Current technical-sheet transport length; older brochure length differs and requires configuration confirmation.
Transport height10 ft 6 in3.2 mJ40 tracked jaw crusher in transport configuration, as shown in the 2023 brochure. Optional hopper extensions and additional equipment must be checked on the actual machine.11 ft 2 in3,403.6 mmUS diesel-direct plant, folded transport state, side discharge conveyor retained. Current technical-sheet transport length; older brochure length differs and requires configuration confirmation.
Feed opening (peak to trough) — width3 ft 4 in1,016 mmJ40 tracked jaw crusher in transport configuration, as shown in the 2023 brochure. Optional hopper extensions and additional equipment must be checked on the actual machine.3 ft 8 in1,117.6 mmUS diesel-direct plant, folded transport state, side discharge conveyor retained. Current technical-sheet transport length; older brochure length differs and requires configuration confirmation.
Feed opening (peak to trough) — height2 ft610 mmJ40 tracked jaw crusher in transport configuration, as shown in the 2023 brochure. Optional hopper extensions and additional equipment must be checked on the actual machine.Not published in this research record
Grizzly feeder width3 ft 1.4 in950 mmJ40 tracked jaw crusher in transport configuration, as shown in the 2023 brochure. Optional hopper extensions and additional equipment must be checked on the actual machine.Not published in this research record
Grizzly feeder length12 ft 7 in3,840 mmJ40 tracked jaw crusher in transport configuration, as shown in the 2023 brochure. Optional hopper extensions and additional equipment must be checked on the actual machine.Not published in this research record
Stockpile height — main conveyor11 ft 4.2 in3,458 mmJ40 tracked jaw crusher in transport configuration, as shown in the 2023 brochure. Optional hopper extensions and additional equipment must be checked on the actual machine.12 ft 4 in3,759.2 mmUS diesel-direct plant, folded transport state, side discharge conveyor retained. Current technical-sheet transport length; older brochure length differs and requires configuration confirmation.
Crusher inlet depthNot published in this research record2 ft 4 in711.2 mmUS diesel-direct plant, folded transport state, side discharge conveyor retained. Current technical-sheet transport length; older brochure length differs and requires configuration confirmation.
Feed height — without extensionNot published in this research record12 ft 10 in3,911.6 mmUS diesel-direct plant, folded transport state, side discharge conveyor retained. Current technical-sheet transport length; older brochure length differs and requires configuration confirmation.

No winner is declared. Job fit depends on configuration, condition, dealer support, attachments, transport and cost assumptions beyond these published figures.